Expansion and I/O Challenges with Older Macs
The Apple Pro Display XDR and LG UltraFine 5K Display use Thunderbolt 3. USB-C If you're using a mophie USB-C Cable with USB-C Connector or other USB-C cable with your device, it will connect to your Mac or iPad Pro without an adapter. Amiroko USB-C to Mini DisplayPort Adapter, USB 3.1 Type C (Thunderbolt 3) to Mini DP Adapter 4K Compatible with Macbook Pro, Lenovo T470, to LED Cinema Display /Dell Monitor, etc, Silver 4.0 out of 5 stars 251. USB C to Mini Displayport ([email protected]), Answin USB-C/Thunderbolt 3 to Mini Displayport Adapter for New iPad Pro 2018, MacBook Pro 2016-2019, Galaxy S10 and More USB Type-C Devices 4.4 out of 5 stars 321 $16.98 $ 16. The Thunderbolt Display is a Thunderbolt device, that has a display built into it. It's not a display that can be plugged directly into a graphics card. Your Mac Pro doesn't have Thunderbolt, so it can't talk to the display. There are hacky workarounds, but they require cold booting into Windows to 'warm up' a Thunderbolt to Displayport mixer card.
Imagine the average 8-12 year old Mac sitting on your desk today. Many are getting long in the tooth and have limited external upgrade potential or simply can’t even keep up with the best options offered today in terms of approaching optimal throughput for external graphics (also known as eGPU) or getting the most out of blazing fast NVMe storage. In most Macs of this vintage, you’re looking at Thunderbolt 1 as your best option for external devices (in 2011 and 2012 Macs) and are thus limited to bi-directional 10 Gb/s, which indeed is nearly double the 6 Gb/s offered by SATA III and these Sandy Bridge and Ivy Bridge Macs. If you look at the majority of 2008-2010 Macs, you then step down to SATA II and 3 Gb/s data rates and max out at 800 Mb/s data rates for external devices with FireWire-800 ports.
No matter what, all of these options are a far cry from the 40 Gb/s data path offered by modern Macs equipped with Thunderbolt III, but what about the cMP (known commonly as the classic Mac Pro)? Is there any black cauldron, dark magic wizardry add-in Thunderbolt 3 cards?? As a matter of fact there are!
The Mac Pro 3,1 to 5,1 Continues Strong Thanks to the GC Titan Ridge and Alpine Ridge
Feast your eyes on a couple amazing devices from the hardware manufacturer Gigabyte.
Enter the GC Titan Ridge and the GC Alpine Ridge…
Recent Advancements Make the GC Titan Ridge and GC Alpine Ridge a Boon for Mac Pro 3,1 to 5,1 Users
These devices have been around a couple of years, but unfortunately (until this year), obtaining one and planning to use with your Mac required you to have Windows installed in Boot Camp alongside MacOS. Previously, booting into Windows first (with the proper Thunderbolt Drivers installed for the card) and modifying the supplied USB type C header cable or adding a jumper was needed. Then you had to switch back to Mac OS via boot screen or via the Boot Camp startup disk selector in Windows to get the card working on the Mac Pro 3,1 to 5,1 (the drivers would stay alive when warm booting back to MacOS and voila – Thunderbolt 3 on you Mac Pro). That was a bit of a turnoff for Mac users who did not want Windows, but had to deal with the inconvenience simply for the sake of having this card installed on their Mac (there were also some glitchy behaviors noted). In the last 6 months or so however, firmware and hardware modders have found ways to get the Titan Ridge and Alpine Ridge working with full functionality in MacOS with no dependency on Windows at all and have nearly ironed out all the bugs. There are even full step-by-step instructions out there for those who want to do it themselves!
This is truly amazing and opens up all kinds of doors for the Mac Pro 3,1 to 5,1 once again.
The GC Titan Ridge Mac Pro 3,1 to 5,1 DIY Route
There’s some good info on the entire process to get the Titan Ridge working on the Mac Pro 3,1 to 5,1 on GitHub, but this will require you to have an EEPROM programmer and the version 23 custom firmware found on MacRumors, which allows you to run this card in the Mac Pro 3,1 to 5,1. You must be cognizant of voltages of your EEPROM programmer, understand risks and follow the entire process correctly or it won’t work. Failure to perform any step incorrectly could result in headaches, repeated flashing attempts and in a worse case scenario – a bricked card and a wasted $150 or so.
Get your GC Titan Ridge or GC Alpine Ridge Card Flashed or buy Pre-Flashed from an Professional
You could just buy a pre-flashed card from an amazing asset to our Low End Mac community on eBay, who sells under the name “Superchief9”:
Search for “Titan Ridge” or “Alpine Ridge” (depending on what you need from Superchief9) – see the differences of hardware noted below. You will not be disappointed! A pre-flashed card is simply plug and play (don’t forget to plug your header cable into the card – the other end does not need to go anywhere). Superchief9 also sells the flashing services for either card if you find a great deal on one on the open market and want to send it in for service (see items list link above for current pricing).
GC Titan Ridge vs GC Alpine Ridge
There are a couple minor differences to note between the GC Titan Ridge and GC Alpine Ridge in terms of the ports offered and overall capabilities (the only immediate obvious one besides the packaging and label on the unit is the difference of a DisplayPort output on the Titan Ridge versus an HDMI output on the Alpine Ridge):
This is a close-up of the ports offered by the Titan Ridge. You get two DisplayPort input connector links (offered by way of Mini DisplayPort), two Thunderbolt 3 inputs and one DisplayPort output.
Installed in a Mac Pro 3,1 is an Alpine Ridge. On the Alpine Ridge you get the same two DisplayPort inputs (via Mini DisplayPort), two Thunderbolt 3 outputs and one HDMI 2.0 output.
The biggest differences however are really “under the hood”. The video throughput that can be passed from your GPU to the DisplayPort connections on the Alpine Ridge versus the Titan Ridge are quite different and so are the link speeds (as well as power supplied), as a result of the different chipsets used:
The Alpine Ridge uses Intel chipset DSL6540, and the video links are negotiated at DisplayPort 1.2 speeds and sent down over either HDMI 1.4 or Thunderbolt 3. The manual states to officially allow for a maximum resolution of 4K 24Hz over the HDMI port, but the Thunderbolt ports allow for up to 4K 60Hz (a single 5K Thunderbolt display can allegedly work on the Alpine Ridge as well). Only bus power is provided with the Alpine Ridge unfortunately and the card is supplied with a total of 38W, which allows you to power typical USB devices, but does not provide enough power for device fast charging (such as a MacBook Pro).
The GC Alpine Ridge is not a GPU. You need a GPU to pass video signals to it. It’s primary purpose is providing Thunderbolt 3 connectivity.
The Titan Ridge on the other hand uses the Intel chipset DSL7540 and negotiates over DisplayPort 1.4. You can use a combination of 2 of the 3 outputs (DisplayPort or the two Thunderbolt 3 ports) at up to 8K 60Hz or allegedly can drive a single 4K display at 120Hz that is FreeSync/G-Sync/VRR or native 120Hz capable! This could be a game changer (no pun intended). Depending on the requirements of the device, with the Thunderbolt 3 ports on the Titan Ridge, you may also be able to fast charge your devices right out of the box without adding additional power, as you get up to 75W of bus power. A current 16″ MacBook Pro will require 87W, and thus, at least one of the 3-pin PCIe power taps on the card need to be connected up to something (powering both taps is probably a good idea to give the card its full 100W).
The GC Titan Ridge is not a GPU. You need a GPU to pass video signals to it. It’s primary purpose is providing Thunderbolt 3 connectivity, but it does provides some advancements and advantages over the Alpine Ridge at just a small premium in price.
I have personally installed the Titan Ridge and at first had ordered the card accepting the old method of booting into Windows first since I was using Boot Camp anyway and then found out about Superchief9’s services. The service was an incredible value – especially if I ever decide to move away from Windows altogether one day (I use it mainly for gaming and Oculus Rift right now). Buying a pre-flashed card frankly to me is the only way to go now.
Fellow LEM Staffer, Mark Sokolovsky also has the Titan Ridge installed in his Mac Pro 5,1 and the Alpine Ridge installed in two of his Mac Pro 3,1 units. These cards are awesome since they let you connect modern peripherals such as Thunderbolt 3 docks (like the Wavlink Thunderdock v2 I obtained shown below), eGPU solutions and much more, truly adding all sorts of new capabilities to the cMP. The manuals for the Alpine Ridge and Titan Ridge do state these cards as being PCIe v3 4x, so that should theoretically be the same as PCIe v2 8x. I need to run some further test to verify overall throughput in my Mac Pro 5,1, but will need a blazing fast NVMe solution to really put it to the test. Nonetheless, this thing works beautifully once you have it going.
Here’s proof of the card being recognized:
Here’s the dock I got:
And lastly, here’s the Wavlink dock being recognized in MacOS:
As a final note, you may need to reboot your Mac Pro a second time after a cold boot if you shut down your Mac when using the flashed card. I’ve had mixed experiences so far, but things actually seem to be more consistent if you have something connected to a dock you are using. Even if I wind up needing to reboot once, it’s a small price to pay (of maybe 20 seconds or so – and that’s just with a cheap SATA 2.5 SSD running in SATA II right now) to get Thunderbolt 3 on my Mac Pro 5,1. I just can’t say enough good things about Superchief9’s service and how well this product functions even if there is a small quirk here and there. Once the card is active and recognized by your Mac, you can hot plug/unplug devices connected to a Thunderbolt 3 Dock from what I have seen so far and you can boot back in forth between MacOS and Windows. I have tested this in MacOS High Sierra, Mojave and Windows 10 so far. It has been stated that this card works in Mavericks on up.
Unfortunately, it’s a no-go for the Mac Pro 1,1 and 2,1 (no one has figured out yet and confirmed what the actual hardware limitation is), but I have a hunch this device requires processors that have SSE v4 execution or greater, which in turn is why it likely works on the Mac Pro 3,1 on up.
Rating Breakdown (Titan Ridge):
In closing, I will give a quick review of the Titan Ridge. I don’t have the Alpine Ridge personally, so I don’t feel it fair to review, but frankly, the Titan Ridge is only $40 more than the Alpine Ridge and is definitely worth it for the extra features it provides, so here it goes.
“Bang for the Buck”: 5/5
These cards can currently be had for around $166 pre-flashed as of July 2020. Prices are always subject to change. Revision 1 and Revision 2 cards work the same, but it will be unknown if future versions of these cards change anything (if brought to market) in terms of functionality or ability to flash to a known working firmware for MacOS. Nontheless, the value is incredible for what it can add to a Mac Pro 3,1 to 5,1. The cards also work in the Mac Pro 7,1.
The amount of devices you are capable of plugging into a Mac Pro 3,1 to 5,1 exponentially increases after installing a GC Titan Ridge or GC Alpine Ridge. There are a few quirks here and there such as the need to sometimes reboot your Mac from a cold boot at times and you might find that all devices don’t work (and some may not have exactly 100% functionality of all features), but based on community sentiment, I’d feel confident saying that at least 97-98% of Thunderbolt 3 certified devices work with these cards and overall that 97-98% of all features across those devices work fine with both cards. You will need to take it with a grain of salt that this is custom firmware and that it won’t be 100% perfect, but it’s going to be pretty darn close and that’s good enough for me if you stick to known working devices.
A Facebook forum is available that is dedicated to the Flashed Titan Ridge and it’s use on the cMP (currently named: Mac 5,1 Titan Ridge TB3 Custom Firmware).
Overall Rating: 9.5/10
Of all the hardware add-ons I’ve purchased and used with my Macs over the years, the GC Titan Ridge perhaps might be the one that has added the most value and capability yet. This takes your Mac Pro 3,1 to 5,1 up to date with modern I/O courtesy of an add-on card it was never intended to be able to use natively and gives you so many options you never could have had before. The enduring power of these old 3,1 to 5,1 cMPs will never cease to disappoint. Perhaps the new “Low End” will be a 20 year old Mac Pro 3,1 in 8 years running some fairly recent software and add-on devices???
LEM Editors Choice Award – Totally Worth It!
If you are a true Apple fan, you must already know that there isn't any dedicated Thunderbolt display, at least for now. The last one was discontinued over four years ago. While the display of your MacBook Air or MacBook Pro might be Retina, they aren't large enough to work or watch content comfortably. That's why to make the best of the Thunderbolt 3 ports, the odds are that you will need supporting 4K monitors.
Thankfully, there are quite a few quality 4K monitors that you can hook to your MacBook display and enjoy the ultra-clear resolution and enjoy the good amount of screen real-estate.
Perhaps one of the advantages of Thunderbolt 3 is that you can link up to 6 devices. ApartThunderbolt 3 is not solely linked to displays. You can also connect hard drives and get the full advantage of the speed. Sounds exciting, right?
And that's not the end of the story, with some monitors, you will be able to charge your Mac as well, with some monitors delivering up to 90W of power.
So, if you are in the market looking for 4K monitors with Thunderbolt 3 ports, here are some of our recommendations.
Also on Guiding Tech
Top 6 Computer Monitors with 2 HDMI PortsRead More
1. LG UltraFine 4K Display
- Number of Thunderbolt 3 ports: 2
- Width: 23.7-inch
LG UltraFine 4K Display
The 23.7-inch UltraFine 4K Display from LG is one of the popular mainstream monitors for Mac users. This IPS panel delivers a refresh rate of 60Hz and a maximum screen resolution of 3840 x 2160 and brings an exciting tableau of features to the table.
For instance, the IPS panel brings a wide-viewing angle and the picture quality is spot on with near-perfect colors and contrast ratio. Download installer app for mac windows 7. At the same time, it supports DCI-P3 wide color gamut.
Above all, the monitor has a sleek style and will greatly complement your MacBook. The inclusion of two Thunderbolt 3 ports and three USB-C ports gives you the flexibility of connecting additional accessories and devices. Though this 4K monitor also bundles built-in speakers, the performance is little less than impressive.
The best part about this monitor is that it provides up to 85W of power that's enough to connect the Mac. You just have to make sure to use the included cable and the right ports.
Interestingly, the UltraFine 4K doesn't come with any buttons. Yep, you read that right. This monitor doesn't even have a power button. Instead, everything is controlled via macOS. Now, that's something. It also ships with a VESA cover.
2. BenQ PD2720U 4K Monitor
- Number of Thunderbolt 3 ports: 2
- Width: 27-inch
BenQ PD2720U 27 inch 4K Monitor
If you want more flexibility in terms of ports and color profile support, you should look at the PD2720U 4K monitor from BenQ. Similar to the monitor above, it sports an IPS panel with a refresh rate of 60Hz. And that's where the similarities end. The BenQ PD2720U comes with a duo of HDMI 2.0 ports, DisplayPort 1.4, two USB A 3.1 ports, a USB Type-B 3.1 Gen 2 port, apart from the USB-C Thunderbolt 3 ports. Plus, there's a 3.5mm port to hook your favorite pair of headphones or speakers.
The display is bright and nice, with accurate color reproduction, and that's something that you will come to expect from a monitor that costs north of $1000. It's suitable mostly for content creators and hence it bundles a trio of different modes such as the Animation mode, Darkroom mode, and the CAD mode.
It supports a slew of color profiles. It displays 100% sRGB and Adobe RGB, and up to 96% of the DCI-P3 color gamut.
Design-wise, the BenQ PD2720U doesn't pack much. Of course, the bezels are thin and the screen appears immersive. Plus the monitor in itself isn't too thick. But that's about it. Look-wise, it doesn't pack anything extraordinary.
Though it can reverse charge your laptop, the 65W of power might not be enough for your Mac. In the case of power-intensive tasks, you might see the battery slowly depleting.
3. Dell UltraSharp UP2720Q
- Number of Thunderbolt 3 ports: 2
- Width: 27-inch
Dell UltraSharp UP2720Q
So what makes the Dell UltraSharp UP2720Q stand out from the rest? What if I told you that this monitor includes a built-in colorimeter to calibrate the display? And needless to say, this is a helpful addition, especially if you are looking to do color-critical work such as photo editing and video editing. On top of the calorimeter, the UltraSharp UP2720Q also displays 100% of Adobe RGB, 80% BT.2020, and 98% of DCI-P3 color gamut.
Beyond that, it packs a dual HDMI 2.0 ports with HDCP 2.2, apart from two Thunderbolt 3 ports, four USB 3.2 ports, and a single DisplayPort 1.4.
And that's not the end of the story. This 4K monitor is known to produce excellent picture quality out of the box with accurate color renders. What's more, the calorimeter helps further this. As per the folks at PC Mag, you can also schedule the calibrations to take place at regular intervals.
This monitor doesn't have HDR, which is understandable considering it's meant for color-sensitive work and not for enjoying top-tier 4K HDR content.
Apart from the above, the UltraSharp UP2720Q also lets you take advantage of the Thunderbolt ports. For example, your Mac will be able to draw 90W power and daisy chain two 4K monitors. It also VESA compatible.
4. Asus ProArt PA32UC 4K Monitor
- Number of Thunderbolt 3 ports: 2
- Width: 32-inch
Asus ProArt PA329C 32-inch 4K Monitor
Another pro-grade monitor with a built-in hardware calibration tool is the Asus ProArt PA329C. Primarily designed for color-critical work, this monitor has a lot to offer. For example, this IPS panel has a max resolution of 3840 x 2160 with a refresh rate of 60Hz. Secondly, it can display 100% sRGB color space coverage, 99.5% Adobe RGB and 95% DCI-P3. As noted earlier, the color calibration tool helps in achieving the perfect color profiles.
Asus has furnished four HDMI 2.0 inputs, a DisplayPort 1.2, two Thunderbolt 3 USB-C ports, and a single USB 3.0 hub with a duo of type-A ports and one USB-C port with this pro-grade display. However, at 60W, the power supply is less when compared to the 90W of the Dell monitor mentioned above. And well, there are two built-in 3W speakers as well. Though they are not loud, they good enough for alerts and notification.
When it comes to the overall output, it delivers a full-blown picture with great contrast ratio and brightness. And the cherry on top is that it implements an excellent HDR implementation as per the folks at TechSpot.
The ProArt PA329C is also beautiful to look at. The bezels are minimal and the solid stand adds to its looks. Apart from rotating and swiveling the panel, you can also prop it up in a vertical position. Now, that's something.
But for a $1000 pro-grade monitor, it isn't without its share of flaws. The combination of 60ms response time and the 60Hz refresh rate can feel sluggish at times, especially if you are planning to use this for something other than content creation.
5. LG 32UL950-W Class Ultrafine 4K UHD LED Monitor
- Number of Thunderbolt 3 ports: 2
- Width: 32-inch
LG 32UL950-W 32-inch Class Ultrafine 4K UHD LED Monitor
It would be a shame if a list of Thunderbolt 3 compatible monitors goes without the mention of the LG 32UL950-W. This one carries the same 4K resolution at 60Hz and the Thunderbolt specifications like the LG UltraFine monitor. However, the similarities end at that. This monitor is beautiful and plenty of ports give you flexibility to connect a bunch of devices.
As for inputs, it bundles two Thunderbolt 3 ports and two 3 USB-C ports apart from the standard USB-A ports (x2), DisplayPort 1.4, HDMI 2.0, and a 3.5mm headphone port.
The flexibility doesn't just end there. You can rotate and swivel this monitor as per your preference. You can rotate it a full 180-degrees if you prefer a vertical display.
Speaking of the display, it reproduces 98% of the DCI-P3 color gamut. Plus, it delivers 60W power to juice up your connected Mac.
Also, if you are looking to mount it on monitor arms or to the wall, you can right away do so, thanks to the VESA mounts. And did we tell you that the stand is outright beautiful?
Also on Guiding Tech
6 Best 4K IPS Monitors for Photo EditingRead More
As Fast as the Flash
Macbook Pro Thunderbolt Port
It won't be news to you if I tell you that Thunderbolt 3 is fast. Yep, this proprietary tech is incredibly fast and can seamlessly transfer data and power at lightning-fast speed, and trust me, I am not kidding. The Thunderbolt 3 ports on the Apple MacBooks mean that you can use any of the ports to connect to a 4K monitor for ultra-clear resolution.
These monitors do not come cheap. Hence, you should take a deep look at each monitor's pros and cons and decide accordingly.
At the same time, if you can do with a low-res monitor, the Samsung CJ791 is worth checking out. It has a 100Hz refresh rate and 3440 x 1440 pixels maximum resolution along with other shebang.
Next up:It goes without saying that the speed on wired networks is better. Click in the link below to check out some of the best Ethernet adapters for your MacBook Pro
Thunderbolt Mac Pro 5 1The above article may contain affiliate links which help support Guiding Tech. However, it does not affect our editorial integrity. The content remains unbiased and authentic.Read Next7 Best Ethernet Adapters for the Apple MacBook ProAlso See#macbook
Apple Thunderbolt Display Monitor#monitor
Did You Know
Apple Watch can be used to unlock your Mac.